The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ #01 107959(01902205) Cylinder attachment Piston SPB/ST SEN/SEL SQ00231523▶ details #02 107893(01902152) [ehemals 103374] Set collar 30 x 25, M 12 mit Bund (Druckstück) SQ00231498▶ details #03 103537(10901030) Self-locking nut M 12 DIN 985 ▶ details #04 103536(01901117) Fastening screw for carrier M 12 x 40 ISO 4017 8.8 ▶ details #05 103534(01901118) Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8 ▶ details #06 103531(01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details #07 103529(01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details #08 103427(01901125) Carrier for top SEL sliding plate incl. screw connection ▶ details #09 103425(01901126) Retaining piece for driver from the SEL sliding plate top SF00199197▶ details #10 103424(01901121) Horizontal bracket on the middle sliding plate SEL L 15 x B 1 H 3.0 cm 0.3 Kg SF00199361▶ details #11 103422(01901120) tappet for ram plate for SPB SEL Vertical L 6.0 x B 1.5 H 8.0 cm 0.5 Kg SF00199192▶ details #12 103421(01901127) Fastening lug Tapp. Sliding plate Fl. 30 x 10 x 100 mm ▶ details #13 103420(01901115) Bracket on the sliding plate, bottom Fl. 40 x 10 x 190 mm SF00199191▶ details #14 103416(01902155) Set screws ISO 4017 12 x 65 V4A ▶ details #15 103415(01900835) Pressure plates 80 x 5 x 1830 mm for SPB SEN / SEL L 183 x B 8 H 0.5 cm SQ00231520▶ details #16 103414(01900850) Pressure plates, turned on edge for SPB SEL L 64.5 x B 11.1 H 0.5 cm SQ00231521▶ details #17 103392(01902370) Mounting cover SEL / SEN 80 mm diameter 2▶ details #18 100833(25200000) Split pin no. 6 8 x 50 ▶ details #19 100548(01902355) Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L L 21 x B 3.5 cm 1▶ details #20 100541(01902025) Press plunger for SPB SEL & ST SEL L 195 x B 67.5 H 59.2 cm 400 Kg SQ00231673▶ details #21 100531(01901030) Sliding plate for SEL incl. driver (bottom) L 193 x B 47.3 H 4.6 cm 115 Kg SF00199288 2▶ details #22 100529(01901025) Sliding plate for SEL incl. driver (middle) für SEL inkl. Mitnehmer (Mitte) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008602 2▶ details #23 100527(01901020) Sliding plate for SEL incl. driver (top) für SEL inkl. Mitnehmer (Oben) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008579 1▶ details #24 100514(01900185) Plastic guide, coloured, for SEN, SEL L 184 x B 8.5 H 4 cm 6 Kg SQ00231529▶ details #25 100511(01900132) Polystone M guide, green, with 2 chamfers for SPB SEL L 65 x B 8.5 H 4 cm 2 Kg MB00050427▶ details article number new (article number old)