The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ #01 103529(01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details #02 103422(01901120) tappet for ram plate for SPB SEL Vertical L 6.0 x B 1.5 H 8.0 cm 0.5 Kg SF00199192▶ details #03 100833(25200000) Split pin no. 6 8 x 50 ▶ details #04 100527(01901020) Sliding plate for SEL incl. driver (top) für SEL inkl. Mitnehmer (Oben) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008579 1▶ details #05 100529(01901025) Sliding plate for SEL incl. driver (middle) für SEL inkl. Mitnehmer (Mitte) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008602 2▶ details #06 100531(01901030) Sliding plate for SEL incl. driver (bottom) L 193 x B 47.3 H 4.6 cm 115 Kg SF00199288 2▶ details #07 103416(01902155) Set screws ISO 4017 12 x 65 V4A ▶ details #08 107893(01902152) [ehemals 103374] Set collar 30 x 25, M 12 mit Bund (Druckstück) SQ00231498▶ details #09 103537(10901030) Self-locking nut M 12 DIN 985 ▶ details #10 103425(01901126) Retaining piece for driver from the SEL sliding plate top SF00199197▶ details #11 103414(01900850) Pressure plates, turned on edge for SPB SEL L 64.5 x B 11.1 H 0.5 cm SQ00231521▶ details #12 103415(01900835) Pressure plates 80 x 5 x 1830 mm for SPB SEN / SEL L 183 x B 8 H 0.5 cm SQ00231520▶ details #13 100541(01902025) Press plunger for SPB SEL & ST SEL L 195 x B 67.5 H 59.2 cm 400 Kg SQ00231673▶ details #14 100511(01900132) Polystone M guide, green, with 2 chamfers for SPB SEL L 65 x B 8.5 H 4 cm 2 Kg MB00050427▶ details #15 100514(01900185) Plastic guide, coloured, for SEN, SEL L 184 x B 8.5 H 4 cm 6 Kg SQ00231529▶ details #16 103392(01902370) Mounting cover SEL / SEN 80 mm diameter 2▶ details #17 103424(01901121) Horizontal bracket on the middle sliding plate SEL L 15 x B 1 H 3.0 cm 0.3 Kg SF00199361▶ details #18 103531(01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details #19 103534(01901118) Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8 ▶ details #20 103536(01901117) Fastening screw for carrier M 12 x 40 ISO 4017 8.8 ▶ details #21 103421(01901127) Fastening lug Tapp. Sliding plate Fl. 30 x 10 x 100 mm ▶ details #22 100548(01902355) Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L L 21 x B 3.5 cm 1▶ details #23 107959(01902205) Cylinder attachment Piston SPB/ST SEN/SEL SQ00231523▶ details #24 103427(01901125) Carrier for top SEL sliding plate incl. screw connection ▶ details #25 103420(01901115) Bracket on the sliding plate, bottom Fl. 40 x 10 x 190 mm SF00199191▶ details article number new (article number old)